Heating repair in Queens and Staten Island by HVAC contractor

Know how a periodic heating repair and maintenance assessment can help to avoid major issues or complete breakdown during pick time.

Why isn’t my heat working?

  • It’s possible that the circuit breaker has tripped. Reset it if necessary.
  • It’s possible that your thermostat isn’t adjusted correctly or is set too low. Check to see if your thermostat is set to heat or cool. Set the thermostat 2 to 4 degrees higher than room temperature.
  • Replace or clean the filters. Be it a gas or oil furnace or a heat pump, be sure to have your filters cleaned or replaced on a regular basis. You can identify the air and oil filters in your device by consulting the owner’s handbook.
  • Check the pilot light. It might have possibly gone out or that the gas line has been switched off. Make sure the gas line is turned on if you have a gas furnace. You’ll need to verify with your local gas provider if the main gas line has been shut off. One of the first things to check if you have an older gas furnace (before 1990) is the pilot light. Consult your owner’s handbook. The procedure for re-lighting the pilot will likely be outlined. If you’re not sure, talk to an expert that specializes in heating repair in Staten Island.

Why is it hot upstairs and cold downstairs?

  • It could be that the heat is leaking from the room. To heat the rooms you desire, create climate zones. Close a few (not all) vents on the second level if you want to do it by yourself. Consequentially, your heating system will be forced to divert more air downwards. Have an HVAC specialist install a climate zone system to step the game up. The heated or cooled air is directed where it is most required in this system.
  • It’s time to update your insulation and weatherstripping. Heat rises and cold air gathers on the ground level, as we all know. When it happens, any chilly air that comes in through draughty doors and windows will be going downstairs. It’s a quick repair that can make a big difference.

Why is the airflow so low?

Replace or clean the filters, if you like. As a matter of fact, dust and grime will build on the filter screen over time. A clog in your air ducts is another possibility. If this is the case, you’ll need to have the ductwork inspected by a HVAC contractor NYC in your area.

Why is my utility bill so high?

  • It’s likely that your system is overheating. If your thermostat is set to a setting that is significantly higher than the outside temperature, your system will have to work more to keep the temperature consistent. Because of this, your power bill may be higher than usual. Change the temperature on your thermostat to a more moderate setting.
  • It’s possible that your utility company has hiked its prices. Compare the prices on your current statement to those from prior months by contacting your utility company. If this is not the case, it’s time to consult specialist for heating repair in Queens.