How to fix a furnace that's not turning on - call Arnica for furnace repair

Just imagine you recently moved into a new home, and the winter is upon you. To your shock, you discovered that the furnace was not turning on. It’s a common problem with most of the homeowners that move in. Sometimes, the furnace gets damaged due to the relocation, sometimes it goes belly up due to overwork. Whatever the reasons may be, you need to get to working before the pipes freeze. Unfortunately, you are clueless about the source of the problem, and are unable figure it out. Call on expert technicians for furnace repair in Queens.

Apart from the inconvenience and discomfort, a broken furnace can cause significant damage to your home, such as the freezing of pipes. The sharp drop in temperature or the moisture caused by a faulty system can damage windows and structures if your home is left unheated for a prolonged period of time.

Furnace troubleshooting tips

Getting the furnace working during the winter is a top priority that should be addressed right away, but it doesn’t always require hiring a professional. You may be able to solve simple furnace problems yourself, such as adjusting the thermostat or relighting the pilot light on a gas furnace. So keep reading for some quick troubleshooting tips.

Make Sure the Thermostat is Turned On:

Some individuals forget to check the thermostat on. It is a crucial component of your heating system that determines the temperature of the room. If the furnace isn’t getting power from the electrical system, a programmed thermometer can’t tell it when to turn on. If you have a programmed thermostat, make sure the display is on.

Ensure the Gas Turned On:

If your furnace or other gas device does not turn on, it’s likely that the gas is not coming into your home. If you suspect a gas leak, call experts immediately and follow the operator’s instructions. Call your utility company to see whether they’re working in your neighborhood or if there have been any service outages.

Check the Furnace’s Power Switch Position:

Sometimes, a furnace isn’t kicking in because it’s been switched off. Maybe, the furnace has been mistakenly turned off. The new tenants or guests may have possibly turned it off considering it as a light switch. It may take several minutes for some furnaces to return to normal operation. If you are looking for furnace repair services, be advised to go through the Arnica heating and air reviews.

Replace an Air Filter:

Any obstruction in the air filter might prevent a furnace from effectively warming the home. Because of the restricted airflow, the heat in the heat exchanger might continue to rise. Regardless of any heating or airflow issues, furnace air filters should be changed every 1 to 3 months. Look for an arrow mark on the frame that shows which way the air is flowing.

Check the Ignition Sensor:

If you’re confident in your DIY abilities, you could choose to clean your furnace’s ignition sensor (also known as the flame sensor). It is essential to clean it in order for the furnace to kick in and function correctly. Look for repair technicians for furnace repair in Staten Island.