Furnace repair Queens Replacing a Thermocouple or Electronic Flame Sensor

The furnace thermocouple is a sensor that sends an electric current to the furnace’s pilot light. This current helps keep the pilot light lit. If the thermocouple isn’t working, then the pilot light will eventually go out and your furnace won’t work. The electronic flame sensor is a safety device that senses if there is a flame in your furnace’s burners. If there isn’t a flame, the electronic flame sensor will shut off the fuel supply to your

Every winter, people living in colder climates have to face the reality of using heating to keep their homes warm. The furnace is a key part of this process, and when it doesn’t work properly, it can be a major inconvenience. In this blog post, we will show you how to replace a furnace thermocouple or electronic flame sensor.

Replacing a furnace thermocouple or electronic flame sensor is not as difficult as it may seem. However, to remove unnecessary headache, be advised to leave it to the experts to handle. Seek professionals that deal with furnace repair in Queens.

Furnace repair in Queens & Staten Island Guide

These simple steps will guide you through the process.

STEP 1: Remove the Fuse

Before you begin, remove the fusible link (a safety device that controls the flow of current from the power source to the electric heating element) and any other fuses or disconnects on the circuit. Once you remove these components, the furnace is ready to be reset.

STEP 2: Remove the Thermocouple

In order to remove the thermocouple, you will need to gently pry up on the base with a flat-blade screwdriver. Remove the screw holding the thermocouple in place. Once the thermocouple is removed, you will need to unplug the thermocouple from the plug end.

STEP 3: Plug the New Thermocouple in Place

The plug side of the thermocouple can be reattached to the plug end using an alligator clip.

STEP 4: Test the Firing Alarm

If the furnace is equipped with an electronic flame or thermocouple alarm, it will go off as soon as you reconnect the thermocouple to the plug end. This test is the only reason to perform this process. If you pass this test, you can now plug the entire unit back into the wall.

Why Should You Seek Professional Help for a Furnace Thermocouple or Electronic Flame Sensor Replacement?

A furnace is one of the most important items to own. It keeps your home comfortable and provides energy-efficient heat. It’s no secret that the electronic flame sensor is one of the easiest items to replace. But there are many potential hazards in removing and replacing this component.

To ensure a safe and stress-free service, it is important to call a professional to complete the replacement of your furnace electronic flame sensor. Make sure that the technician has years of experience and expertise in furnace repair in Staten Island. The majority of reputable service companies will have an owner or technician on site with proper equipment and skill. By following the steps outlined above, you can ensure that your furnace will perform at its best.