About 30 percent of the average monthly power expenditure is attributable to heating costs. Energy consumption decreases with increasing heating system efficiency. An efficient heating system may cost more to install initially, but it will pay for itself over time in energy savings.
What Makes a Heating System Efficient?
To determine the efficiency of your heating system, you need to know how much heat is being lost. The most common way to measure this is by measuring the amount of heat that goes into a room and then subtracting it from the amount of heat going out of the room. This will give you an estimate of how well your heating system is performing.
The system’s yearly fuel utilization efficiency rating is the most crucial statistic. High efficiency is indicated by an Annual Fuel Utilization Efficiency (AFUE) of 90%, for instance. One and a half tons of carbon dioxide emissions per year can be avoided by upgrading a furnace or boiler from 56% efficiency to 90% efficiency. Opt for heating installation in Staten Island.
Types of Heating Systems Installation:
With access to natural gas, furnaces stand out as the most effective heating option. Using a fan and something called a heat exchanger, they warm air outside and then push it through ducts inside the house (often referred to as a blower). In addition to their excellent efficiency ratings, furnaces’ low price points is a major selling point.
The drawback of this option? Due to the fan, most furnaces are rather noisy.
Heat Pump Installation:
Combined air conditioner and heating, a heat pump is a multi-functional appliance (the fact that it is dual purpose makes it efficient in its own way). When it’s hot outside, the unit pulls air from inside your home, cools it with a refrigerant, and then pumps it back inside. In the colder months, it draws air from within and recirculates it, heating the room. The heat pump does not introduce any outside air into the building at any time.
Among the advantages are quietness and superior air filtration (unlike furnaces, they are quiet). You can choose from three different types of heat pumps (air-source, split-duct, and geothermal). Will a heat pump lower my monthly energy bill? Perhaps, it’s also possible that it isn’t. It’s unclear whether or not they’ll save you money on gas or increase your electricity cost.
The Annual Fuel Utilization Efficiency (AFUE) rating is not applicable to heat pumps. For heating mode, their efficiency is measured by the Heating Seasonal Performance Factor, and for electricity use, by the Seasonal Energy Efficiency Ratio (for cooling mode). One may avoid a lot of hassle by just looking for heat pumps that have earned the Energy Star label (this will help make sure you are getting one that checks off all the right boxes).
Boiler Installation:
Don’t laugh, but boilers are still widely used nowadays. The water in a boiler’s storage tank is heated, and the water is then sent through a system of pipes to the various radiators in your house to provide boiler. When turned on, radiators disperse warm air throughout a building.
When it comes to heating a home, natural gas boilers are just as efficient, if not more so, than furnaces (some have AFUE ratings of up to 100). While oil-fired boilers are still available, they are not as widespread as electric boilers in American houses. However, boilers have a larger footprint than your typical furnace or oven due to their tall, cylindrical design.
Irrespective of heating units, be sure to seek professional expertise for heating installation in Queens.
Over 35 years of experienced HVAC engineer and blogger with years of experience writing about various topics related to multiple types of HVAC systems installation, repair, and maintenance. I have been in this industry since my apprenticeship in 1985. Our team emphasizes quality workmanship while ensuring customer satisfaction is our top priority.
Leave a Reply
You must be logged in to post a comment.