When it comes to troubleshooting a furnace it is advisable to get help from a technician but there might be instances when you are unable to reach through professional help. Those are times when you might need to handle furnace repair in Queens. It need not be extensive but there are simple troubleshooting tips from pros that can help get the furnace back in working condition so that you don’t have much trouble with the same.
DIY tips on furnace troubleshooting and repair in Queens and Brooklyn
Following are some of the tips from experts to deal with the furnace issues and which can help keep costly furnace repair in Brooklyn away:
The thermostat should be set to ‘Heat’
A mistake often on the part of the homeowners is that the thermostat is not set to the right configuration. Hence the first step is to check the thermostat setting. The thermostat switch can get moved easily. The thermostat need to be at a set point and at a specific temperature that can turn on the furnace. The furnace will take some time for the fan and the heat to kick in. If the furnace does not come on even after that then the thermostat should be set to 90 degrees Fahrenheit. This will restrict the furnace from turning on and off repeatedly during the troubleshooting.
Have a look at the batteries
Many homeowners have their thermostats attached to the electrical system of their house while there are others that operate on batteries. The ones that run on batteries will flash a low-battery symbol when they are out of charge and will need to be replaced. Unfortunately the signal often gets unnoticed by the owner and hence you face issues with the furnace.
Taking a close look at the filters
Dirty or clogged filters are often the reason for furnace trouble. Homeowners don’t pay heed to proper cleaning of the filters and the dust and dirt that accumulates over time starts limiting the airflow and bringing the functionality of the furnace down. The ones that are designed on modern technology shuts the furnace off as soon as they sense that the filters are dirty. Many times you can hear a whistling sound from the furnace. You can then be sure that the furnace is not getting enough air from the filter and it is try to pull the sir from any possible opening. This sound from the furnace is an indication of a problem.
Check whether the furnace is getting power
You can have a look at this yourself without involving a technician for furnace troubleshooting. Most of the thermostats have a switch for the fan with ON and Auto modes. Push the switch to ON. If the fan starts then there is power to the furnace. If not then there is some problem with the furnace.
The furnace is not a very hard thing to handle. In a trouble scenario, you don’t have to rely on technicians for furnace troubleshooting. There are simple tips through which the owner can troubleshoot the problems themselves.
Simone Arnica is the certified and more than 35 years experienced HVAC expert from Arnica Heating and Air Conditioning Inc. suggesting maintenance tips for the HVAC system to protect it from early damage, unwanted maintenance cost and also to save on energy cost. Follow the blog to learn how it can be done easily.
Leave a Reply
You must be logged in to post a comment.